Taixiong Brand > Emergency spray eye wash device >Electric heat tracing antifreeze emergency spray eye washer

Electric heat tracing antifreeze emergency spray eye washer
SAN-7601H

Flow control valve design, adjustable water outlet height

Using sanitary grade 304 stainless steel material, the inner wall of the pipe is smooth mirror surface, free of grease and rust

The height of the eye wash basin is suitable, and the dual water outlet design conforms to ergonomic principles

Product Description

The emergency eye wash device is the core safety equipment for handling chemical injuries in laboratories. It can quickly wash away harmful substances that come into contact with the eyes, face, and body, minimizing damage to the greatest extent possible. The electric heat tracing and anti freezing equipment designed for low-temperature environments achieves dual protection through an intelligent electric heat tracing system (maintaining water temperature of 15-38 ℃) and anti freezing material valves: the pipeline does not freeze when standing still, and the components do not brittle under severe cold, ensuring immediate water supply for emergency use. It should be noted that electric heat tracing is only used for standby antifreeze and insulation, and is not a traditional heating device. It does not provide hot water function during use and focuses on ensuring emergency reliability in extreme environments.

The production of the SAN series emergency spray eye washers produced by Taixiong strictly follows the national standard GB 38144-2025 "Eye and Face Protection - Emergency Spray and Eye Washing Equipment", ANSI/ISEA Z358.1, EN 15154 international standards, and has passed the international authoritative TUV certification, proving its compliance with relevant safety and performance.

认证.png

Product Parameters

Subject
304 stainless steel
Shell
Glass fiber reinforced plastic
Rinse tray
304 stainless steel
Dripping rod
304 stainless steel
Eye wash basin
304 stainless steel
Eye wash switch
304 stainless steel ball valve
Eye wash nozzle
High-quality copper material
Eye wash dust cover
PP
Applicable Water Pressure
0.2-0.4MPa
Pipeline
Diameter 45mm
Power
120W

Product Drawing

Product Design

The electric tracing device includes a self limiting temperature electric heating belt, a temperature controller (controlling temperature between 15-38 ℃), an insulation layer, and explosion-proof wiring components. Its optional sound and light alarm system is triggered by a flow switch (developed by Taixiong), which can be linked to prompt surrounding personnel and report to the control center in case of emergency use. Optional: The core component SAN-72001 flow switch adopts high reliability components from the United States, with fully sealed and spark free contact design, completely isolated from the medium, suitable for temperatures ≥ -20 ℃, accurate detection of equipment start stop status, and ensuring safe operation of alarm function.

Product Composition

产品组成.jpg

Precautions

Location layout
The equipment should be set within a 10 second walking distance from potential hazardous areas, and it is recommended to maintain a straight-line distance between 10-15 meters. Ensure that the path from the hazardous area to the equipment is unobstructed and straight, in order to quickly reach and use it in emergency situations
Spray range
There are no obstacles within 410mm of the center of the spray range
Reserved location
Reserve grounding potential, water inlet point, and drainage point
Utilities
The dynamic water pressure should be between 0.2Mpa-0.4Mpa
Rinse requirements
Eye wash/face wash flow rate ≥ 11.4 L/min, spray flow rate ≥ 76 L/min, both should be continuously rinsed for at least 15 minutes
Wastewater treatment
Please dispose of the wastewater promptly after use to avoid the formation of puddles or freezing at low temperatures, in order to prevent slipping after use
Training requirements
Before putting the emergency spray eye wash device into use, please train employees on the correct use of the device
Water quality temperature
Use pure water at room temperature or water that meets hygiene standards, with a suitable temperature range of 16 ℃ -38 ℃. The water temperature should not be too high to avoid accelerating the reaction of chemical substances and causing accidents
Tel
24-hour service hotline400-638-0616
Online
Online Consultation
Name*
Tel*
Company*
Email
Your needs*
* Required field
Tel
400-638-0616
Email
marketing@sanmfg.com
Add
T3-1801, Zhonggeng Global Creative Center, Lane 166,
Min Hong Road, Shanghai
WeChat
Business Consulting